Have a Question?

If you have any question you can ask below or enter what you are looking for!

How to Check Your Audi A3 – 8L – at Home With Coding Software

The explanation of how to check your Audi A3 – 8L – car using a computer or a mobile phone at home in detail

Anyone with the right device can read and analyze Audi A3 – 8L -, with a little bit of training, knowledge and practice you can easily detect most of the problems in your Audi A3 – 8L -. In this article today, we will learn how to check out the faults on the Audi A3 – 8L – by knowing what tools you need to check, where to find them, how to check the Audi A3 – 8L – by a computer or even by the Audi A3 – 8L – mobile and to connect To the vehicle computer

The car’s computer

There is something that most people do not know which is that cars from 1996, and the newer generations contain mini computers, and these mini computers represent the driving mind in the car, where this computer can analyze and know all problems and failures in the car engine and most other parts. Even more, it’s easy to check your car with your computer or with mobile devices if they are available. So, it’s easier and more accurate to count on the device that can make you find the problems in your Audi A3 – 8L – car in just a few seconds, making it easy to keep your routine maintenance.

When does is appear that your Audi A3 – 8L – needs to be checked with the computer?

The need to check the vehicle with the computer appears in several cases, the most important of which are:

  • Before you buy a used vehicle, you must certainly check it by computer, and have it checked by a professional.
  • When the Check Engine warning symbol is displayed, which usually has a yellow or orange color with the engine symbol.
  • If you suspect a problem due to erratic or sensing a problem in Audi A3 – 8L – car.
  • If a computer memory reset is required, which happens after repairing a specific part connected to the vehicle computer.

How the Audi A3 – 8L – scanning device work 

The vehicle scanning device is based on reading the problems that has been recorded by the vehicle computer, and those problems are resulting from a failure of a vehicle engine component such as sensors. As these sensors were previously recorded inside the vehicle’s computer as a software if one of the values sent by the sensor differs from the values previously stored in the vehicle’s computer memory, an error is recorded in this sensor without showing the cause of the failure. That is, it only tells you that there is a particular fault. When you install the scanning device and connects it to the vehicle computer, it reads what the vehicle computer has recorded, and a check program performs the task of translating the registered fault into a code into a language that you can understand.

The required tools to scan Audi A3 – 8L –

  • the scan Device, or OBD II Reader, called the – (ELM327). This device used to connect to the car computer and there are three versions of this device as needed, which are a USB connection for direct connection to the Bluetooth or WIFI connection and can connect the Audi A3 – 8L – with the mobile phone for real-time engine updates on your mobile screen. The original part of this device can be purchased from this “note this connection you can use with most car types” 2-Software for viewing and analyzing these issues and codes and there are many software available on your mobile devices and computer but we recommend the TOAD-Pro Windows OBD Software. The best program in this field is to know and analyze all fault codes, which is not available in the latest programs or on mobile devices and can be obtained.

 

  • The software for viewing and analyzing these problems and codes and there are many programs available on mobile devices and computers, but we recommend the TOAD-Pro Windows OBD Software, the best software in the industry, where it can identify and analyze all the fault codes, which is not available in the latest software or on mobile devices and can be obtained With gifts 17 professional fault analysis and code programs here.

PROS

  • Can read and clear engine as well as transmission codes
  • Compatible with all OBD2-compliant vehicles
  • Tests vehicle for emission readiness
  • Can display live data and monitor fuel economy
  • Supports nine modes of data, including Mode 1 (Analog Digital Gauges), Mode 1 (List View), Mode 2 (Freeze Frame Data), Mode 3 (Current Faults), Mode A (stored DTCs) and Mode 4 all through Mode 9.
  • Supports several OBD2 protocols, including CAN (Bus), CAN (11-bit and 94-bit), ISO-9141, ISO-14230, ISO-15765 and ELM327
  • Can be optimized for touchscreens
  • Customizable dashboard

CONS

  • Costlier than most other OBD2 software for PC
  • Not compatible with Mac and Linux

The steps to scan Audi A3 – 8L – by computer

Before carrying out the vehicle inspection, the vehicle’s use manual should be consulted for ease of scanning and to ensure that it is properly completed, and after that you should do:

  1. Search for computer exits inside the vehicle that are often under the vehicle’s steering wheel in the footwell, but can vary in location from a second vehicle; therefore, the vehicle’s usage guide is important.
  2. The vehicle’s computer exits are a rectangular cable and has a multi-slot cable, with up to 16 slots. 3. Connect the scanning device link.
  3. Switch on the car switches, so that they are in standby mode, which make the electrical systems inside the car enabled.
  4. power on the Engine, if required, depending on vehicle quality.

 

  • The connection to Audi A3 – 8L – computer

before performing the inspection, it is recommended that you read the inspection device user manual, then:

  1. Find the exit for the vehicle computer, usually located under the vehicle’s steering wheel at the driver’s feet, and its exact location varies from vehicle to vehicle, so read the vehicle’s manual for further information.
  2. You will find the exit as a rectangular plug-in; it has a 16-hole outlet.
  3. Connect the ELM327.
  4. Change the vehicle switch to the ready position, which is the stage that will make the vehicle’s electrical systems on.
  5. On some vehicles you need to start the engine.
  6. Connect the link to your laptop, some devices do not require a computer, but are connected to the mobile depending on the model you chose for the ELM327 link.
  • Reading data

The TOAD-Pro program will display the error code with the explanation of the code and error caused. If you don’t find the code explanation, you can search for it online to find it easily, for example this link contains an explanation of more than 5,000 code.

  • Fixing the errors

Fixing the problem, if the problem is simple in the Audi A3 – 8L – car and you can resolve it by yourself do it without hesitation, but if you find it difficult and complex and can’t do it, consult a repair professional. Or go to a designated maintenance center with Audi A3 – 8L -. Automatically after you have fixed the problem, the “Check Engine” alarm will disappear and the alert readings on your vehicle will disappear.

The errors that can be found using the computer

The Faults that the scanning device can detect are  electrical faults, such as: Vehicle lights- or contact in the cable harness- or transmission sensors- or treadplates- Fuel control monitoring-and the efficiency of the clerical catalyst- and the recycling of exhaust gases- Heating circuits that warm the instruments (heaters) and O2 sensors- as well as the oxygen sensor data.

people who search for How to Check Your Audi A3 – 8L – at Home also searches for:

What is the best OBD scanner for Audi A3 – 8L -?
What is the best scan tool for Audi A3 – 8L – ?
What obd2 protocol does Audi A3 – 8L – use?
How do I scan a Audi A3 – 8L – code?
What is the best code reader for Audi A3 – 8L – ?
Does Audi A3 – 8L – use obd2?
What is Audi A3 – 8L – coding tool?
How do I use Audi A3 – 8L – diagnostic software?
How do I reset my Audi A3 – 8L – computer?
What is the best cheap obd2 Scanner?
How do I install Audi A3 – 8L – standard tools?
Is Audi A3 – 8L – obd2 compliant?
How do I use Audi A3 – 8L – diagnostic software?
popular Audi A3 – 8L – Obd Bluetooth
What obd2 protocol does Audi A3 – 8L – use?
What is INPA Audi A3 – 8L – software?
What is the best Audi A3 – 8L – diagnostic software?
What is the best vehicle diagnostic software?
How do I run a car diagnostic on my laptop?
How do I check my car for problems with my computer?
What software mechanics use?
What is Audi A3 – 8L – ISTA software?
What is the best obd2 software for laptop?
Best OBD2 Software for Audi A3 – 8L –
How do I code my Audi A3 – 8L – at home?
scan tool to register Audi A3 – 8L – battery
best obd ii scan tool for Audi A3 – 8L –
what is the best scan tool for Audi A3 – 8L –
best diagnostic scan tool for Audi A3 – 8L –
original carly wifi scan tool for Audi A3 – 8L –
b800 srs airbag scan/reset tool for Audi A3 – 8L –
foxwell scan tool for Audi A3 – 8L –
how do you reset the computer on a Audi A3 – 8L –
upgrade Audi A3 – 8L – computer
how to use on board computer Audi A3 – 8L –
reprogram Audi A3 – 8L – computer
reflash Audi A3 – 8L – computer
computer driver information system Audi A3 – 8L –
cost to reset Audi A3 – 8L – computer
Audi A3 – 8L – digital speed in board computer
Audi A3 – 8L – computer tool
Audi A3 – 8L – 1 series computer update
Audi A3 – 8L – computer software
Audi A3 – 8L – computer service
Audi A3 – 8L – computer reader
Audi A3 – 8L – computer repair
Audi A3 – 8L – computer code reader
Audi A3 – 8L – computer cable
Audi A3 – 8L – computer codes
Audi A3 – 8L – computer check
Keyword Average MonthlySearches Article Keyword Tags
yellow check engine light Audi A3 – 8L –
how do you check the oil on a Audi A3 – 8L –
how to check what service your Audi A3 – 8L – needs
how to check if your Audi A3 – 8L – has a recall
Audi A3 – 8L – manufacture year check
what causes Audi A3 – 8L – check engine light
what does Audi A3 – 8L – check engine light mean
why is my Audi A3 – 8L – check engine light on
Audi A3 – 8L – warranty check
check Audi A3 – 8L – warranty expiration
check Audi A3 – 8L – warranty status
Audi A3 – 8L – software update check
turn off Audi A3 – 8L – check engine light
how to check Audi A3 – 8L – service history
how to check Audi A3 – 8L – warranty
service history Audi A3 – 8L – check
service pack Audi A3 – 8L – check
Audi A3 – 8L – spec check
Audi A3 – 8L – specification check
recall Audi A3 – 8L – check
service Audi A3 – 8L – check
reset Audi A3 – 8L – check engine light
reset Audi A3 – 8L – check control messages
reasons for Audi A3 – 8L – check engine light
Audi A3 – 8L – service plan check
Audi A3 – 8L – service pack check uk
Audi A3 – 8L – phone compatibility check
check my Audi A3 – 8L – service pack
Audi A3 – 8L – service package check
quanto custa check up Audi A3 – 8L –
how to check oil quality in Audi A3 – 8L –
check engine light on Audi A3 – 8L –
Audi A3 – 8L – end of warranty check
Audi A3 – 8L – engine number check
Audi A3 – 8L – spec check number
Audi A3 – 8L – serial number check
Audi A3 – 8L – check control messages
Audi A3 – 8L – check engine light after oil change
Audi A3 – 8L – takata airbag check
Audi A3 – 8L – check engine light all systems ok
Audi A3 – 8L – amber check engine light
Audi A3 – 8L – check brake lights warning
Audi A3 – 8L – check battery terminals
Audi A3 – 8L – check button
Audi A3 – 8L – check battery level
Audi A3 – 8L – check control module
Audi A3 – 8L – check coolant level
Audi A3 – 8L – check codes
Audi A3 – 8L – check control message list
Audi A3 – 8L – check engine symbols
Audi A3 – 8L – check engine light gas cap
Audi A3 – 8L – check engine soon
Audi A3 – 8L – check for recall
check Audi A3 – 8L – history online