Have a Question?

If you have any question you can ask below or enter what you are looking for!

How to Check Your Audi S4 (B5) at Home With Coding Software

The explanation of how to check your Audi S4 (B5) car using a computer or a mobile phone at home in detail

Anyone with the right device can read and analyze Audi S4 (B5), with a little bit of training, knowledge and practice you can easily detect most of the problems in your Audi S4 (B5). In this article today, we will learn how to check out the faults on the Audi S4 (B5) by knowing what tools you need to check, where to find them, how to check the Audi S4 (B5) by a computer or even by the Audi S4 (B5) mobile and to connect To the vehicle computer

The car’s computer

There is something that most people do not know which is that cars from 1996, and the newer generations contain mini computers, and these mini computers represent the driving mind in the car, where this computer can analyze and know all problems and failures in the car engine and most other parts. Even more, it’s easy to check your car with your computer or with mobile devices if they are available. So, it’s easier and more accurate to count on the device that can make you find the problems in your Audi S4 (B5) car in just a few seconds, making it easy to keep your routine maintenance.

When does is appear that your Audi S4 (B5) needs to be checked with the computer?

The need to check the vehicle with the computer appears in several cases, the most important of which are:

  • Before you buy a used vehicle, you must certainly check it by computer, and have it checked by a professional.
  • When the Check Engine warning symbol is displayed, which usually has a yellow or orange color with the engine symbol.
  • If you suspect a problem due to erratic or sensing a problem in Audi S4 (B5) car.
  • If a computer memory reset is required, which happens after repairing a specific part connected to the vehicle computer.

How the Audi S4 (B5) scanning device work 

The vehicle scanning device is based on reading the problems that has been recorded by the vehicle computer, and those problems are resulting from a failure of a vehicle engine component such as sensors. As these sensors were previously recorded inside the vehicle’s computer as a software if one of the values sent by the sensor differs from the values previously stored in the vehicle’s computer memory, an error is recorded in this sensor without showing the cause of the failure. That is, it only tells you that there is a particular fault. When you install the scanning device and connects it to the vehicle computer, it reads what the vehicle computer has recorded, and a check program performs the task of translating the registered fault into a code into a language that you can understand.

The required tools to scan Audi S4 (B5)

  • the scan Device, or OBD II Reader, called the – (ELM327). This device used to connect to the car computer and there are three versions of this device as needed, which are a USB connection for direct connection to the Bluetooth or WIFI connection and can connect the Audi S4 (B5) with the mobile phone for real-time engine updates on your mobile screen. The original part of this device can be purchased from this “note this connection you can use with most car types” 2-Software for viewing and analyzing these issues and codes and there are many software available on your mobile devices and computer but we recommend the TOAD-Pro Windows OBD Software. The best program in this field is to know and analyze all fault codes, which is not available in the latest programs or on mobile devices and can be obtained.


  • The software for viewing and analyzing these problems and codes and there are many programs available on mobile devices and computers, but we recommend the TOAD-Pro Windows OBD Software, the best software in the industry, where it can identify and analyze all the fault codes, which is not available in the latest software or on mobile devices and can be obtained With gifts 17 professional fault analysis and code programs here.


  • Can read and clear engine as well as transmission codes
  • Compatible with all OBD2-compliant vehicles
  • Tests vehicle for emission readiness
  • Can display live data and monitor fuel economy
  • Supports nine modes of data, including Mode 1 (Analog Digital Gauges), Mode 1 (List View), Mode 2 (Freeze Frame Data), Mode 3 (Current Faults), Mode A (stored DTCs) and Mode 4 all through Mode 9.
  • Supports several OBD2 protocols, including CAN (Bus), CAN (11-bit and 94-bit), ISO-9141, ISO-14230, ISO-15765 and ELM327
  • Can be optimized for touchscreens
  • Customizable dashboard


  • Costlier than most other OBD2 software for PC
  • Not compatible with Mac and Linux

The steps to scan Audi S4 (B5) by computer

Before carrying out the vehicle inspection, the vehicle’s use manual should be consulted for ease of scanning and to ensure that it is properly completed, and after that you should do:

  1. Search for computer exits inside the vehicle that are often under the vehicle’s steering wheel in the footwell, but can vary in location from a second vehicle; therefore, the vehicle’s usage guide is important.
  2. The vehicle’s computer exits are a rectangular cable and has a multi-slot cable, with up to 16 slots. 3. Connect the scanning device link.
  3. Switch on the car switches, so that they are in standby mode, which make the electrical systems inside the car enabled.
  4. power on the Engine, if required, depending on vehicle quality.


  • The connection to Audi S4 (B5) computer

before performing the inspection, it is recommended that you read the inspection device user manual, then:

  1. Find the exit for the vehicle computer, usually located under the vehicle’s steering wheel at the driver’s feet, and its exact location varies from vehicle to vehicle, so read the vehicle’s manual for further information.
  2. You will find the exit as a rectangular plug-in; it has a 16-hole outlet.
  3. Connect the ELM327.
  4. Change the vehicle switch to the ready position, which is the stage that will make the vehicle’s electrical systems on.
  5. On some vehicles you need to start the engine.
  6. Connect the link to your laptop, some devices do not require a computer, but are connected to the mobile depending on the model you chose for the ELM327 link.
  • Reading data

The TOAD-Pro program will display the error code with the explanation of the code and error caused. If you don’t find the code explanation, you can search for it online to find it easily, for example this link contains an explanation of more than 5,000 code.

  • Fixing the errors

Fixing the problem, if the problem is simple in the Audi S4 (B5) car and you can resolve it by yourself do it without hesitation, but if you find it difficult and complex and can’t do it, consult a repair professional. Or go to a designated maintenance center with Audi S4 (B5). Automatically after you have fixed the problem, the “Check Engine” alarm will disappear and the alert readings on your vehicle will disappear.

The errors that can be found using the computer

The Faults that the scanning device can detect are  electrical faults, such as: Vehicle lights- or contact in the cable harness- or transmission sensors- or treadplates- Fuel control monitoring-and the efficiency of the clerical catalyst- and the recycling of exhaust gases- Heating circuits that warm the instruments (heaters) and O2 sensors- as well as the oxygen sensor data.

people who search for How to Check Your Audi S4 (B5) at Home also searches for:

What is the best OBD scanner for Audi S4 (B5)?
What is the best scan tool for Audi S4 (B5) ?
What obd2 protocol does Audi S4 (B5) use?
How do I scan a Audi S4 (B5) code?
What is the best code reader for Audi S4 (B5) ?
Does Audi S4 (B5) use obd2?
What is Audi S4 (B5) coding tool?
How do I use Audi S4 (B5) diagnostic software?
How do I reset my Audi S4 (B5) computer?
What is the best cheap obd2 Scanner?
How do I install Audi S4 (B5) standard tools?
Is Audi S4 (B5) obd2 compliant?
How do I use Audi S4 (B5) diagnostic software?
popular Audi S4 (B5) Obd Bluetooth
What obd2 protocol does Audi S4 (B5) use?
What is INPA Audi S4 (B5) software?
What is the best Audi S4 (B5) diagnostic software?
What is the best vehicle diagnostic software?
How do I run a car diagnostic on my laptop?
How do I check my car for problems with my computer?
What software mechanics use?
What is Audi S4 (B5) ISTA software?
What is the best obd2 software for laptop?
Best OBD2 Software for Audi S4 (B5)
How do I code my Audi S4 (B5) at home?
scan tool to register Audi S4 (B5) battery
best obd ii scan tool for Audi S4 (B5)
what is the best scan tool for Audi S4 (B5)
best diagnostic scan tool for Audi S4 (B5)
original carly wifi scan tool for Audi S4 (B5)
b800 srs airbag scan/reset tool for Audi S4 (B5)
foxwell scan tool for Audi S4 (B5)
how do you reset the computer on a Audi S4 (B5)
upgrade Audi S4 (B5) computer
how to use on board computer Audi S4 (B5)
reprogram Audi S4 (B5) computer
reflash Audi S4 (B5) computer
computer driver information system Audi S4 (B5)
cost to reset Audi S4 (B5) computer
Audi S4 (B5) digital speed in board computer
Audi S4 (B5) computer tool
Audi S4 (B5) 1 series computer update
Audi S4 (B5) computer software
Audi S4 (B5) computer service
Audi S4 (B5) computer reader
Audi S4 (B5) computer repair
Audi S4 (B5) computer code reader
Audi S4 (B5) computer cable
Audi S4 (B5) computer codes
Audi S4 (B5) computer check
Keyword Average MonthlySearches Article Keyword Tags
yellow check engine light Audi S4 (B5)
how do you check the oil on a Audi S4 (B5)
how to check what service your Audi S4 (B5) needs
how to check if your Audi S4 (B5) has a recall
Audi S4 (B5) manufacture year check
what causes Audi S4 (B5) check engine light
what does Audi S4 (B5) check engine light mean
why is my Audi S4 (B5) check engine light on
Audi S4 (B5) warranty check
check Audi S4 (B5) warranty expiration
check Audi S4 (B5) warranty status
Audi S4 (B5) software update check
turn off Audi S4 (B5) check engine light
how to check Audi S4 (B5) service history
how to check Audi S4 (B5) warranty
service history Audi S4 (B5) check
service pack Audi S4 (B5) check
Audi S4 (B5) spec check
Audi S4 (B5) specification check
recall Audi S4 (B5) check
service Audi S4 (B5) check
reset Audi S4 (B5) check engine light
reset Audi S4 (B5) check control messages
reasons for Audi S4 (B5) check engine light
Audi S4 (B5) service plan check
Audi S4 (B5) service pack check uk
Audi S4 (B5) phone compatibility check
check my Audi S4 (B5) service pack
Audi S4 (B5) service package check
quanto custa check up Audi S4 (B5)
how to check oil quality in Audi S4 (B5)
check engine light on Audi S4 (B5)
Audi S4 (B5) end of warranty check
Audi S4 (B5) engine number check
Audi S4 (B5) spec check number
Audi S4 (B5) serial number check
Audi S4 (B5) check control messages
Audi S4 (B5) check engine light after oil change
Audi S4 (B5) takata airbag check
Audi S4 (B5) check engine light all systems ok
Audi S4 (B5) amber check engine light
Audi S4 (B5) check brake lights warning
Audi S4 (B5) check battery terminals
Audi S4 (B5) check button
Audi S4 (B5) check battery level
Audi S4 (B5) check control module
Audi S4 (B5) check coolant level
Audi S4 (B5) check codes
Audi S4 (B5) check control message list
Audi S4 (B5) check engine symbols
Audi S4 (B5) check engine light gas cap
Audi S4 (B5) check engine soon
Audi S4 (B5) check for recall
check Audi S4 (B5) history online