How to Check Your Mercedes-Benz W211 / NTG at Home With Coding Software

The explanation of how to check your Mercedes-Benz W211 / NTG car using a computer or a mobile phone at home in detail

Anyone with the right device can read and analyze Mercedes-Benz W211 / NTG, with a little bit of training, knowledge and practice you can easily detect most of the problems in your Mercedes-Benz W211 / NTG. In this article today, we will learn how to check out the faults on the Mercedes-Benz W211 / NTG by knowing what tools you need to check, where to find them, how to check the Mercedes-Benz W211 / NTG by a computer or even by the Mercedes-Benz W211 / NTG mobile and to connect To the vehicle computer

The car’s computer

There is something that most people do not know which is that cars from 1996, and the newer generations contain mini computers, and these mini computers represent the driving mind in the car, where this computer can analyze and know all problems and failures in the car engine and most other parts. Even more, it’s easy to check your car with your computer or with mobile devices if they are available. So, it’s easier and more accurate to count on the device that can make you find the problems in your Mercedes-Benz W211 / NTG car in just a few seconds, making it easy to keep your routine maintenance.

When does is appear that your Mercedes-Benz W211 / NTG needs to be checked with the computer?

The need to check the vehicle with the computer appears in several cases, the most important of which are:

• Before you buy a used vehicle, you must certainly check it by computer, and have it checked by a professional.
• When the Check Engine warning symbol is displayed, which usually has a yellow or orange color with the engine symbol.
• If you suspect a problem due to erratic or sensing a problem in Mercedes-Benz W211 / NTG car.
• If a computer memory reset is required, which happens after repairing a specific part connected to the vehicle computer.

How the Mercedes-Benz W211 / NTG scanning device work 

The vehicle scanning device is based on reading the problems that has been recorded by the vehicle computer, and those problems are resulting from a failure of a vehicle engine component such as sensors. As these sensors were previously recorded inside the vehicle’s computer as a software if one of the values sent by the sensor differs from the values previously stored in the vehicle’s computer memory, an error is recorded in this sensor without showing the cause of the failure. That is, it only tells you that there is a particular fault. When you install the scanning device and connects it to the vehicle computer, it reads what the vehicle computer has recorded, and a check program performs the task of translating the registered fault into a code into a language that you can understand.

The required tools to scan Mercedes-Benz W211 / NTG

• the scan Device, or OBD II Reader, called the – (ELM327). This device used to connect to the car computer and there are three versions of this device as needed, which are a USB connection for direct connection to the Bluetooth or WIFI connection and can connect the Mercedes-Benz W211 / NTG with the mobile phone for real-time engine updates on your mobile screen. The original part of this device can be purchased from this “note this connection you can use with most car types” 2-Software for viewing and analyzing these issues and codes and there are many software available on your mobile devices and computer but we recommend the TOAD-Pro Windows OBD Software. The best program in this field is to know and analyze all fault codes, which is not available in the latest programs or on mobile devices and can be obtained.

• The software for viewing and analyzing these problems and codes and there are many programs available on mobile devices and computers, but we recommend the TOAD-Pro Windows OBD Software, the best software in the industry, where it can identify and analyze all the fault codes, which is not available in the latest software or on mobile devices and can be obtained With gifts 17 professional fault analysis and code programs here.

PROS

The steps to scan Mercedes-Benz W211 / NTG by computer

Before carrying out the vehicle inspection, the vehicle’s use manual should be consulted for ease of scanning and to ensure that it is properly completed, and after that you should do:

1. Search for computer exits inside the vehicle that are often under the vehicle’s steering wheel in the footwell, but can vary in location from a second vehicle; therefore, the vehicle’s usage guide is important.
2. The vehicle’s computer exits are a rectangular cable and has a multi-slot cable, with up to 16 slots. 3. Connect the scanning device link.
3. Switch on the car switches, so that they are in standby mode, which make the electrical systems inside the car enabled.
4. power on the Engine, if required, depending on vehicle quality.

• The connection to Mercedes-Benz W211 / NTG computer

before performing the inspection, it is recommended that you read the inspection device user manual, then:

1. Find the exit for the vehicle computer, usually located under the vehicle’s steering wheel at the driver’s feet, and its exact location varies from vehicle to vehicle, so read the vehicle’s manual for further information.
2. You will find the exit as a rectangular plug-in; it has a 16-hole outlet.
3. Connect the ELM327.
4. Change the vehicle switch to the ready position, which is the stage that will make the vehicle’s electrical systems on.
5. On some vehicles you need to start the engine.
6. Connect the link to your laptop, some devices do not require a computer, but are connected to the mobile depending on the model you chose for the ELM327 link.

• Reading data

The TOAD-Pro program will display the error code with the explanation of the code and error caused. If you don’t find the code explanation, you can search for it online to find it easily, for example this link contains an explanation of more than 5,000 code.

• Fixing the errors

Fixing the problem, if the problem is simple in the Mercedes-Benz W211 / NTG car and you can resolve it by yourself do it without hesitation, but if you find it difficult and complex and can’t do it, consult a repair professional. Or go to a designated maintenance center with Mercedes-Benz W211 / NTG. Automatically after you have fixed the problem, the “Check Engine” alarm will disappear and the alert readings on your vehicle will disappear.

The errors that can be found using the computer

The Faults that the scanning device can detect are  electrical faults, such as: Vehicle lights- or contact in the cable harness- or transmission sensors- or treadplates- Fuel control monitoring-and the efficiency of the clerical catalyst- and the recycling of exhaust gases- Heating circuits that warm the instruments (heaters) and O2 sensors- as well as the oxygen sensor data.

people who search for How to Check Your Mercedes-Benz W211 / NTG at Home also searches for:

What is the best OBD scanner for Mercedes-Benz W211 / NTG?
What is the best scan tool for Mercedes-Benz W211 / NTG ?
What obd2 protocol does Mercedes-Benz W211 / NTG use?
How do I scan a Mercedes-Benz W211 / NTG code?
What is the best code reader for Mercedes-Benz W211 / NTG ?
Does Mercedes-Benz W211 / NTG use obd2?
What is Mercedes-Benz W211 / NTG coding tool?
How do I use Mercedes-Benz W211 / NTG diagnostic software?
How do I reset my Mercedes-Benz W211 / NTG computer?
What is the best cheap obd2 Scanner?
How do I install Mercedes-Benz W211 / NTG standard tools?
Is Mercedes-Benz W211 / NTG obd2 compliant?
How do I use Mercedes-Benz W211 / NTG diagnostic software?
popular Mercedes-Benz W211 / NTG Obd Bluetooth
What obd2 protocol does Mercedes-Benz W211 / NTG use?
What is INPA Mercedes-Benz W211 / NTG software?
What is the best Mercedes-Benz W211 / NTG diagnostic software?
What is the best vehicle diagnostic software?
How do I run a car diagnostic on my laptop?
How do I check my car for problems with my computer?
What software mechanics use?
What is Mercedes-Benz W211 / NTG ISTA software?
What is the best obd2 software for laptop?
Best OBD2 Software for Mercedes-Benz W211 / NTG
How do I code my Mercedes-Benz W211 / NTG at home?
scan tool to register Mercedes-Benz W211 / NTG battery
best obd ii scan tool for Mercedes-Benz W211 / NTG
what is the best scan tool for Mercedes-Benz W211 / NTG
best diagnostic scan tool for Mercedes-Benz W211 / NTG
original carly wifi scan tool for Mercedes-Benz W211 / NTG
b800 srs airbag scan/reset tool for Mercedes-Benz W211 / NTG
foxwell scan tool for Mercedes-Benz W211 / NTG
how do you reset the computer on a Mercedes-Benz W211 / NTG
upgrade Mercedes-Benz W211 / NTG computer
how to use on board computer Mercedes-Benz W211 / NTG
reprogram Mercedes-Benz W211 / NTG computer
reflash Mercedes-Benz W211 / NTG computer
computer driver information system Mercedes-Benz W211 / NTG
cost to reset Mercedes-Benz W211 / NTG computer
Mercedes-Benz W211 / NTG digital speed in board computer
Mercedes-Benz W211 / NTG computer tool
Mercedes-Benz W211 / NTG 1 series computer update
Mercedes-Benz W211 / NTG computer software
Mercedes-Benz W211 / NTG computer service
Mercedes-Benz W211 / NTG computer reader
Mercedes-Benz W211 / NTG computer repair
Mercedes-Benz W211 / NTG computer code reader
Mercedes-Benz W211 / NTG computer cable
Mercedes-Benz W211 / NTG computer codes
Mercedes-Benz W211 / NTG computer check
Keyword Average MonthlySearches Article Keyword Tags
yellow check engine light Mercedes-Benz W211 / NTG
how do you check the oil on a Mercedes-Benz W211 / NTG
how to check what service your Mercedes-Benz W211 / NTG needs
how to check if your Mercedes-Benz W211 / NTG has a recall
Mercedes-Benz W211 / NTG manufacture year check
what causes Mercedes-Benz W211 / NTG check engine light
what does Mercedes-Benz W211 / NTG check engine light mean
why is my Mercedes-Benz W211 / NTG check engine light on
Mercedes-Benz W211 / NTG warranty check
check Mercedes-Benz W211 / NTG warranty expiration
check Mercedes-Benz W211 / NTG warranty status
Mercedes-Benz W211 / NTG software update check
turn off Mercedes-Benz W211 / NTG check engine light
how to check Mercedes-Benz W211 / NTG service history
how to check Mercedes-Benz W211 / NTG warranty
service history Mercedes-Benz W211 / NTG check
service pack Mercedes-Benz W211 / NTG check
Mercedes-Benz W211 / NTG spec check
Mercedes-Benz W211 / NTG specification check
recall Mercedes-Benz W211 / NTG check
service Mercedes-Benz W211 / NTG check
reset Mercedes-Benz W211 / NTG check engine light
reset Mercedes-Benz W211 / NTG check control messages
reasons for Mercedes-Benz W211 / NTG check engine light
Mercedes-Benz W211 / NTG service plan check
Mercedes-Benz W211 / NTG service pack check uk
Mercedes-Benz W211 / NTG phone compatibility check
check my Mercedes-Benz W211 / NTG service pack
Mercedes-Benz W211 / NTG service package check
quanto custa check up Mercedes-Benz W211 / NTG
how to check oil quality in Mercedes-Benz W211 / NTG
check engine light on Mercedes-Benz W211 / NTG
Mercedes-Benz W211 / NTG end of warranty check
Mercedes-Benz W211 / NTG engine number check
Mercedes-Benz W211 / NTG spec check number
Mercedes-Benz W211 / NTG serial number check
Mercedes-Benz W211 / NTG check control messages
Mercedes-Benz W211 / NTG check engine light after oil change
Mercedes-Benz W211 / NTG takata airbag check
Mercedes-Benz W211 / NTG check engine light all systems ok
Mercedes-Benz W211 / NTG amber check engine light
Mercedes-Benz W211 / NTG check brake lights warning
Mercedes-Benz W211 / NTG check battery terminals
Mercedes-Benz W211 / NTG check button
Mercedes-Benz W211 / NTG check battery level
Mercedes-Benz W211 / NTG check control module
Mercedes-Benz W211 / NTG check coolant level
Mercedes-Benz W211 / NTG check codes
Mercedes-Benz W211 / NTG check control message list
Mercedes-Benz W211 / NTG check engine symbols
Mercedes-Benz W211 / NTG check engine light gas cap
Mercedes-Benz W211 / NTG check engine soon
Mercedes-Benz W211 / NTG check for recall
check Mercedes-Benz W211 / NTG history online