Have a Question?

If you have any question you can ask below or enter what you are looking for!

How to Check Your Peugeot 106 at Home With Coding Software

The explanation of how to check your Peugeot 106 car using a computer or a mobile phone at home in detail

Anyone with the right device can read and analyze Peugeot 106, with a little bit of training, knowledge and practice you can easily detect most of the problems in your Peugeot 106. In this article today, we will learn how to check out the faults on the Peugeot 106 by knowing what tools you need to check, where to find them, how to check the Peugeot 106 by a computer or even by the Peugeot 106 mobile and to connect To the vehicle computer

The car’s computer

There is something that most people do not know which is that cars from 1996, and the newer generations contain mini computers, and these mini computers represent the driving mind in the car, where this computer can analyze and know all problems and failures in the car engine and most other parts. Even more, it’s easy to check your car with your computer or with mobile devices if they are available. So, it’s easier and more accurate to count on the device that can make you find the problems in your Peugeot 106 car in just a few seconds, making it easy to keep your routine maintenance.

When does is appear that your Peugeot 106 needs to be checked with the computer?

The need to check the vehicle with the computer appears in several cases, the most important of which are:

  • Before you buy a used vehicle, you must certainly check it by computer, and have it checked by a professional.
  • When the Check Engine warning symbol is displayed, which usually has a yellow or orange color with the engine symbol.
  • If you suspect a problem due to erratic or sensing a problem in Peugeot 106 car.
  • If a computer memory reset is required, which happens after repairing a specific part connected to the vehicle computer.

How the Peugeot 106 scanning device work 

The vehicle scanning device is based on reading the problems that has been recorded by the vehicle computer, and those problems are resulting from a failure of a vehicle engine component such as sensors. As these sensors were previously recorded inside the vehicle’s computer as a software if one of the values sent by the sensor differs from the values previously stored in the vehicle’s computer memory, an error is recorded in this sensor without showing the cause of the failure. That is, it only tells you that there is a particular fault. When you install the scanning device and connects it to the vehicle computer, it reads what the vehicle computer has recorded, and a check program performs the task of translating the registered fault into a code into a language that you can understand.

The required tools to scan Peugeot 106

  • the scan Device, or OBD II Reader, called the – (ELM327). This device used to connect to the car computer and there are three versions of this device as needed, which are a USB connection for direct connection to the Bluetooth or WIFI connection and can connect the Peugeot 106 with the mobile phone for real-time engine updates on your mobile screen. The original part of this device can be purchased from this “note this connection you can use with most car types” 2-Software for viewing and analyzing these issues and codes and there are many software available on your mobile devices and computer but we recommend the TOAD-Pro Windows OBD Software. The best program in this field is to know and analyze all fault codes, which is not available in the latest programs or on mobile devices and can be obtained.

 

  • The software for viewing and analyzing these problems and codes and there are many programs available on mobile devices and computers, but we recommend the TOAD-Pro Windows OBD Software, the best software in the industry, where it can identify and analyze all the fault codes, which is not available in the latest software or on mobile devices and can be obtained With gifts 17 professional fault analysis and code programs here.

PROS

  • Can read and clear engine as well as transmission codes
  • Compatible with all OBD2-compliant vehicles
  • Tests vehicle for emission readiness
  • Can display live data and monitor fuel economy
  • Supports nine modes of data, including Mode 1 (Analog Digital Gauges), Mode 1 (List View), Mode 2 (Freeze Frame Data), Mode 3 (Current Faults), Mode A (stored DTCs) and Mode 4 all through Mode 9.
  • Supports several OBD2 protocols, including CAN (Bus), CAN (11-bit and 94-bit), ISO-9141, ISO-14230, ISO-15765 and ELM327
  • Can be optimized for touchscreens
  • Customizable dashboard

CONS

  • Costlier than most other OBD2 software for PC
  • Not compatible with Mac and Linux

The steps to scan Peugeot 106 by computer

Before carrying out the vehicle inspection, the vehicle’s use manual should be consulted for ease of scanning and to ensure that it is properly completed, and after that you should do:

  1. Search for computer exits inside the vehicle that are often under the vehicle’s steering wheel in the footwell, but can vary in location from a second vehicle; therefore, the vehicle’s usage guide is important.
  2. The vehicle’s computer exits are a rectangular cable and has a multi-slot cable, with up to 16 slots. 3. Connect the scanning device link.
  3. Switch on the car switches, so that they are in standby mode, which make the electrical systems inside the car enabled.
  4. power on the Engine, if required, depending on vehicle quality.

 

  • The connection to Peugeot 106 computer

before performing the inspection, it is recommended that you read the inspection device user manual, then:

  1. Find the exit for the vehicle computer, usually located under the vehicle’s steering wheel at the driver’s feet, and its exact location varies from vehicle to vehicle, so read the vehicle’s manual for further information.
  2. You will find the exit as a rectangular plug-in; it has a 16-hole outlet.
  3. Connect the ELM327.
  4. Change the vehicle switch to the ready position, which is the stage that will make the vehicle’s electrical systems on.
  5. On some vehicles you need to start the engine.
  6. Connect the link to your laptop, some devices do not require a computer, but are connected to the mobile depending on the model you chose for the ELM327 link.
  • Reading data

The TOAD-Pro program will display the error code with the explanation of the code and error caused. If you don’t find the code explanation, you can search for it online to find it easily, for example this link contains an explanation of more than 5,000 code.

  • Fixing the errors

Fixing the problem, if the problem is simple in the Peugeot 106 car and you can resolve it by yourself do it without hesitation, but if you find it difficult and complex and can’t do it, consult a repair professional. Or go to a designated maintenance center with Peugeot 106. Automatically after you have fixed the problem, the “Check Engine” alarm will disappear and the alert readings on your vehicle will disappear.

The errors that can be found using the computer

The Faults that the scanning device can detect are  electrical faults, such as: Vehicle lights- or contact in the cable harness- or transmission sensors- or treadplates- Fuel control monitoring-and the efficiency of the clerical catalyst- and the recycling of exhaust gases- Heating circuits that warm the instruments (heaters) and O2 sensors- as well as the oxygen sensor data.

people who search for How to Check Your Peugeot 106 at Home also searches for:

What is the best OBD scanner for Peugeot 106?
What is the best scan tool for Peugeot 106 ?
What obd2 protocol does Peugeot 106 use?
How do I scan a Peugeot 106 code?
What is the best code reader for Peugeot 106 ?
Does Peugeot 106 use obd2?
What is Peugeot 106 coding tool?
How do I use Peugeot 106 diagnostic software?
How do I reset my Peugeot 106 computer?
What is the best cheap obd2 Scanner?
How do I install Peugeot 106 standard tools?
Is Peugeot 106 obd2 compliant?
How do I use Peugeot 106 diagnostic software?
popular Peugeot 106 Obd Bluetooth
What obd2 protocol does Peugeot 106 use?
What is INPA Peugeot 106 software?
What is the best Peugeot 106 diagnostic software?
What is the best vehicle diagnostic software?
How do I run a car diagnostic on my laptop?
How do I check my car for problems with my computer?
What software mechanics use?
What is Peugeot 106 ISTA software?
What is the best obd2 software for laptop?
Best OBD2 Software for Peugeot 106
How do I code my Peugeot 106 at home?
scan tool to register Peugeot 106 battery
best obd ii scan tool for Peugeot 106
what is the best scan tool for Peugeot 106
best diagnostic scan tool for Peugeot 106
original carly wifi scan tool for Peugeot 106
b800 srs airbag scan/reset tool for Peugeot 106
foxwell scan tool for Peugeot 106
how do you reset the computer on a Peugeot 106
upgrade Peugeot 106 computer
how to use on board computer Peugeot 106
reprogram Peugeot 106 computer
reflash Peugeot 106 computer
computer driver information system Peugeot 106
cost to reset Peugeot 106 computer
Peugeot 106 digital speed in board computer
Peugeot 106 computer tool
Peugeot 106 1 series computer update
Peugeot 106 computer software
Peugeot 106 computer service
Peugeot 106 computer reader
Peugeot 106 computer repair
Peugeot 106 computer code reader
Peugeot 106 computer cable
Peugeot 106 computer codes
Peugeot 106 computer check
Keyword Average MonthlySearches Article Keyword Tags
yellow check engine light Peugeot 106
how do you check the oil on a Peugeot 106
how to check what service your Peugeot 106 needs
how to check if your Peugeot 106 has a recall
Peugeot 106 manufacture year check
what causes Peugeot 106 check engine light
what does Peugeot 106 check engine light mean
why is my Peugeot 106 check engine light on
Peugeot 106 warranty check
check Peugeot 106 warranty expiration
check Peugeot 106 warranty status
Peugeot 106 software update check
turn off Peugeot 106 check engine light
how to check Peugeot 106 service history
how to check Peugeot 106 warranty
service history Peugeot 106 check
service pack Peugeot 106 check
Peugeot 106 spec check
Peugeot 106 specification check
recall Peugeot 106 check
service Peugeot 106 check
reset Peugeot 106 check engine light
reset Peugeot 106 check control messages
reasons for Peugeot 106 check engine light
Peugeot 106 service plan check
Peugeot 106 service pack check uk
Peugeot 106 phone compatibility check
check my Peugeot 106 service pack
Peugeot 106 service package check
quanto custa check up Peugeot 106
how to check oil quality in Peugeot 106
check engine light on Peugeot 106
Peugeot 106 end of warranty check
Peugeot 106 engine number check
Peugeot 106 spec check number
Peugeot 106 serial number check
Peugeot 106 check control messages
Peugeot 106 check engine light after oil change
Peugeot 106 takata airbag check
Peugeot 106 check engine light all systems ok
Peugeot 106 amber check engine light
Peugeot 106 check brake lights warning
Peugeot 106 check battery terminals
Peugeot 106 check button
Peugeot 106 check battery level
Peugeot 106 check control module
Peugeot 106 check coolant level
Peugeot 106 check codes
Peugeot 106 check control message list
Peugeot 106 check engine symbols
Peugeot 106 check engine light gas cap
Peugeot 106 check engine soon
Peugeot 106 check for recall
check Peugeot 106 history online